Sheet Metal Bending | Brake Metal | Sheet Metal Forming
Our CNC Press Brakes can reproduce complex multiple bend
caps, copings, trim, and drip. The brakes adjust after every bend both
by dimension and angle to create consistent parts. This
eliminates the time needed to mark scribes and measure each part, and also
eliminates material handling time since the entire part can be
formed at once. True angles are obtained no
matter what the part length via CNC adaptive
forming technology and Auto Crown capability.
We have an extensive selection of
over 100 dies to correctly brake your metal.
We have Vees, Goosenecks, Flattening, Offsets,
Radiused, Hemming, and Specialty dies to create
specific bends.
In addition to these brakes we also have a smaller hydraulic press
brake solely set up for 1/2" hems. This enables us to create tight
consistent hems for aesthetics and safety.
This also eliminates the need for repetitive die
changes.
We also have a 10' hand brake for small piecework jobs where
programming is not necessary or economical.
Machine List - Description
-
Piranha - 175 Ton Hydraulic - 12' bed. NC Controlled
-
Cincinnati - 90 Ton Hydraulic - 10' bed. CNC Controlled with user PC touch screen interface. Auto Crown ensures consistent bends throughout part.
-
Roto-Die- Hydraulic 10' Die - 20 ga. capacity - We use this machine to from 1/2" open and closed hems only.
-
Chicago Hand Brake - 10' leaf brake.
-
(2) 4' Box & pan brakes -
No comments:
Post a Comment